SONJIU ELECTRONIC ENTERPRISE CO., LTD.
SONJIU is Tantalum Capacitor Manufacturer an Ordnance Bench Mark from Taiwan. Winning ISO 9002 and SGS. SONJIN is honored to continue the best services for domestic and foreign customers.

Facebook Plurk Twitter

HP Series , HP Series Snap-in type 105℃

Categories  > Aluminum Capacitor > Snap-in > HP Series Snap-in type 105℃



Product Name :

HP Series Snap-in type 105℃


Features:

  • Highly reliable capacitor that withstand ripple current.
  • Two or three dimensions with same ratings.
  • Terminal spacing fixed at 10mm for printed circuit board plug in.
  • Aluminum case designed explosion-proof vent.
  • Best for switching power supplies.
  • For detail specifications, please refer to Engineering Bulletin No. E107


Specification:

Item

Performance Characteristics

Operating Temperature Range

-40 to +105℃

-25 to +105℃

Rated working voltage Range

10 to 100VDC

160 to 450VDC

Nominal Capacitance Range

330 to 68000uF

33 to 2200uF

Capacitance Tolerance

±20% (120Hz, +20℃)

Leakage Current (+20℃)

I ≦0.03CV After 5 minutes

Dissipation Factor (120Hz,+20℃)

Less than the value under table (%) max

uF/WVDC

10~16

25~35

50~63

80~100

160~250

315~450

33~470

15

15

20

560~3900

25

20

20

20

15

20

4700~8200

35

30

30

25

10000~22000

40

35

30

27000~47000

45

40

35

56000~68000

50

45

(+20℃, at 120Hz)

Stability at Low Temperature

Impedance radio at 120Hz.

Rated Voltage (V)

10

16

25

35

50

63

100

160

200

250

400

450

Z-25℃/Z+20℃

5

5

4

4

4

4

4

4

4

4

8

8

Z-40℃/Z+20℃

15

15

15

12

12

12

12

Load Life

Test conditions

Duration time

:2000Hrs

Ambient temperature

:+85℃

Applied voltage

Rated DC working voltage

After test requirements at +20℃

Capacitance change

:≦±20% of the initial measured value

Dissipation factor

:≦200% of the initial specified value

Leakage current

:≦The initial specified value

Shelf Life

Test conditions
Duration time : 500Hrs
Ambient temperature : +85℃
Applied voltage : None
After test requirements at +20℃: Same limits as Load life.
Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes.

Diagram of Dimensions: (Unit: mm)

Multiplier for ripple current vs. Frequency   Multiplier for Ripple Current vs. Temperature
CAP (uF) / Hz

50(60)

120

400

1K

10K

50K-100K

 
Multiplier Cap≦10
10< CAP≦100
100< CAP≦1000
1000< CAP

0.8

1

1.30

1.30

1.65

1.70

Temperature ℃ 45 60 85 95 105

0.8

1

1.23

1.23

1.48

1.53

Multiplier 2.10 1.90 1.4 1.25 1.00

0.8

1

1.16

1.16

1.35

1.38

           

0.8

1

1.11

1.11

1.25

1.28

           

Case Size and Maximum Ripple Current (A, rms 120 Hz at 105℃)

WV

uF

Case Size
Ø DxL(mm)

Ir
(A)

WV

uF

Case Size
Ø DxL(mm)

Ir
(A)

WV

uF

Case Size
Ø DxL(mm)

Ir
(A)

WV

uF

Case Size
Ø DxL(mm)

Ir
(A)

10

4700

22x26

1.24

16

3300

22x26

1.17

16

56000

35x52

7.05

35

1500

22x26

1.26

6800

22x26

1.56

4700

22x31

1.53

25

2200

22x26

1.03

2200

22x31

1.35

25x26

25x26

3300

22x26

1.48

25x26

8200

22x26

2.04

6800

22x31

2.02

25x26

3300

22x31

1.84

10000

22x31

2.20

25x26

4700

22x31

1.92

25x26

25x26

30x26

25x26

30x26

30x26

8200

22x31

2.20

30x26

3900

22x31

2.23

12000

22x36

2.34

10000

22x36

2.79

5600

22x31

2.25

4700

22x36

2.42

15000

22x36

2.76

25x31

6800

22x31

2.60

25x31

25x31

30x26

25x26

30x26

30x26

12000

22x36

3.06

30x26

5600

22x36

2.89

18000

22x36

2.94

25x31

8200

22x36

3.04

25x31

25x31

30x26

25x31

30x26

22000

22x41

3.12

15000

22x51

3.24

30x26

6800

22x41

3.24

25x36

25x41

10000

22x41

3.50

25x36

30x31

30x36

25x36

30x31

35x27

35x32

30x31

35x27

27000

22x46

3.48

18000

22x51

3.51

35x27

8200

22x51

3.57

25x36

25x46

12000

22x46

4.02

25x41

30x31

30x36

25x41

30x31

35x27

35x32

30x31

35x27

33000

25x46

3.72

22000

25x51

4.08

35x27

10000

25x46

3.96

30x36

30x46

15000

25x46

4.58

30x36

35x32

35x32

30x36

35x32

39000

25x51

4.10

27000

25x51

4.30

35x32

12000

25x51

4.21

30x41

30x41

18000

25x51

4.82

30x41

35x32

35x37

30x41

35x32

47000

30x46

4.38

33000

30x46

4.83

35x37

15000

30x46

4.69

35x37

35x37

22000

30x46

5.12

35x37

56000

30x51

4.64

3900

30x51

5.78

35x37

18000

35x42

5.07

35x42

35x42

27000

35x47

5.47

22000

35x52

5.50

68000

35x52

4.80

47000

35x47

6.32

33000

35x52

6.09


WV

uF

Case Size
Ø DxL(mm)

Ir
(A)

WV

uF

Case Size
Ø DxL(mm)

Ir
(A)

WV

uF

Case Size
Ø DxL(mm)

Ir
(A)

WV

uF

Case Size
Ø DxL(mm)

Ir
(A)

50

1000

22x26

0.84

63

680

22x26

0.70

80

470

22x26

0.63

100

330

22x26

0.54

1500

22x31

1.10

1000

22x26

0.85

680

22x31

0.84

470

22x31

0.79

25x26

25x26

25x26

25x26

1800

22x31

1.54

1200

22x26

0.98

820

22x31

1.02

560

25x26

0.96

2200

22x31

1.65

1500

22x31

1.10

1000

22x36

1.16

680

22x31

1.02

25x26

25x26

25x31

25x26

30x26

30x26

30x26

30x26

2700

22x36

1.94

1800

22x31

1.40

1200

22x36

1.46

820

22x31

1.24

25x31

25x26

25x31

25x26

3300

22x36

2.24

2200

22x36

1.65

1500

22x41

1.74

1000

22x36

1.38

25x31

25x31

25x36

25x31

30x26

30x26

30x31

30x26

3900

22x41

2.54

2700

22x41

2.07

1800

22x46

1.95

1200

22x41

1.65

25x36

25x36

25x41

25x36

30x31

30x26

30x31

30x31

4700

22x46

2.95

3300

22x51

2.48

2200

25x51

2.25

1500

22x46

1.83

25x41

25x41

25x46

25x41

30x31

30x31

30x36

30x31

35x27

35x27

35x32

35x27

5600

22x51

3.10

3900

25x46

3.05

2700

25x51

2.68

1800

25x41

2.52

25x46

30x36

30x41

30x36

30x41

35x32

35x37

35x32

35x32

4700

25x51

3.43

3300

25x56

3.30

2200

25x51

3.03

6800

25x51

3.26

30x41

30x51

30x41

30x41

35x32

35x42

35x32

35x32

5600

30x46

3.86

3900

30x51

3.85

2700

30x46

4.10

8200

30x46

3.58

35x37

35x42

35x37

35x37

6800

30x51

4.64

4700

30x51

4.29

3300

30x56

4.59

10000

30x51

4.11

35x42

35x42

35x47

35x42

8200

35x47

5.05

5600

35x47

5.10

3900

35x47

4.98

12000

35x47

4.62

10000

35x52

5.75

6800

35x52

5.66

4700

35x52

5.43

15000

35x52

5.05


WV

uF

Case Size
Ø DxL(mm)

Ir
(A)

WV

uF

Case Size
Ø DxL(mm)

Ir
(A)

WV

uF

Case Size
Ø DxL(mm)

Ir
(A)

WV

uF

Case Size
Ø DxL(mm)

Ir
(A)

WV

uF

Case Size
Ø DxL(mm)

Ir
(A)

160

220

22x26

0.65

200

100

22x26

0.38

250

68

22x26

0.27

400

33

22x26

0.39

450

33

22x26

0.40

270

22x26

0.74

150

22x26

0.54

100

22x31

0.44

47

22x26

0.56

47

22x31

0.60

330

22x31

0.98

25x26

25x26

25x26

25x26

25x26

220

22x31

0.92

150

22x31

0.60

56

22x31

0.68

56

22x31

0.70

30x26

25x26

25x26

68

22x31

0.72

25x26

390

22x36

1.10

30x26

30x26

25x26

68

22x36

0.80

25x31

270

22x31

1.03

180

22x31

0.69

30x26

25x31

470

22x36

1.21

25x26

25x26

82

22x36

0.82

30x26

25x31

330

22x36

1.21

220

22x36

1.00

25x31

82

22x36

0.88

560

22x41

1.40

25x31

25x31

100

22x36

0.82

25x31

25x36

30x26

30x26

25x31

30x26

30x31

390

22x41

1.39

270

22x41

1.16

30x26

100

22x41

0.90

680

22x46

1.64

25x36

25x36

120

22x36

0.90

25x31

25x41

30x31

30x31

22x31

30x31

30x36

470

22x46

1.62

330

22x46

1.28

30x26

120

22x46

1.00

35x32

25x41

25x36

150

22x46

0.98

25x41

820

25x46

1.85

30x31

30x31

25x41

30x31

30x36

35x26

35x26

30x31

150

22x51

1.05

35x32

560

22x51

1.85

390

22x46

1.48

180

25x46

1.14

25x41

1000

25x51

2.15

25x41

25x36

30x36

30x36

30x41

30x36

30x31

35x32

180

25x51

1.14

1200

25x56

2.46

680

22x56

2.04

470

25x46

1.76

220

25x51

1.21

30x41

30x46

25x51

30x36

30x41

35x32

1500

30x51

2.80

30x36

35x32

35x32

220

30x46

1.24

35x42

820

25x56

2.34

560

25x51

1.93

270

30x46

1.40

35x37

1800

30x51

3.13

30x41

30x41

35x37

270

30x51

1.48

35x42

35x37

35x32

330

30x51

1.57

35x42

2200

35x52

3.39

1000

30x51

2.70

680

30x46

2.22

35x42

330

35x47

1.64

35x42

35x37

390

35x47

1.74

390

35x52

1.86

1200

30x51

3.00

820

30x51

2.48

470

35x52

1.98

35x42

35x42

560

35x52

2.23

1500

35x52

3.43

1000

35x47

2.80

1800

35x52

4.01

1200

35x52

3.17




This is the detailed information for HP Series Snap-in type 105℃, HP Series. The information includes model, name, description and specification for HP Series Snap-in type 105℃, HP Series. Related Keywords : Aluminum Capacitor, EC Capacitor



Please send your Inquiries for HP Series Snap-in type 105℃, HP Series to us. We will contact you soon. Please also check out the related product categories below.


Designed by Web Builder & Trade Associated with AsianNet
Address :  No,236. ZhongZheng Rd.,Mituo District,Kaohsiung City 827, Taiwan(R.O.C) Privacy Policy
Telephone :  886-7-6194759  Fax :  886-7-6100959  
E-Mail : sonjiu@sonjiu.com.tw